Early vintage Chrysler vehicles experienced a problem with not starting when cold. If you add fuel, the engine will start, then stall. If you keep adding fuel, eventually the engine will continue to run.

You should start your diagnostics by checking out all the usual suspects, spark, fuel pressure, etc. But if you've exhausted all those possibilities, try this. Get out a hair dryer and gently warm the powertrain control module (PCM) located under the hood near the fender. Exact location depends on vehicle. Warm the front and back side of the PCM. Then try starting the vehicle. If it starts, you'll need to replace the PCM. Don't freak out, they are available from rebuilders for a reasonable price. You will need to provide the VIN number to get the corrrect PCM and return the old unit to get core credit.

For more information on this repair or any others for your vehicle, buy an online subscription to either Alldatadiy.com or eautorepair.net. Click on this link to compare the two services: Compare Alldata and Eautorepair.

If you just need information for a single repair and want to save money,eautorepair offers a lower price 1-week subscription for only $11.99. Or, if you'll be working on this vehicle in the future, you can buy a 1-year subscription (Alldatadiy.com for $26.99, or eautorepair.net $29.99)

© 2007 Rick Muscoplat

Both Alldata and Eautorepair offer professional grade shop manuals at a price you can afford. Check them out!.

Hover your mouse over the REPAIR ARTICLES tab at the top of the page. The click on DIAGNOSTICS to search by SYMPTOM, TROUBLE CODE, or read TECH TIPS on how to diagnose a problem

Click on MAKE an MODEL to see all the articles I've written for your vehicle
Click on REPAIR TOPICS to read individual articles written for specific automotive systems

If you've had your car scanned and know the trouble code go to TROUBLE CODES

Here are some quick links to speed up your research

Click on the link below for speedy navigation:

ABS issues, how to bleed ABS brakes

Airbag issues or SRS light on

Alternator issues or how to test

Belt diagram or serpentine belt issues

Blower motor

Blower motor resistor

Brakes, brake issues, what kind of brake parts to buy, ABS issues

Car Alarms or Antitheft systems

Cooling system, Water pump, What type of coolant to use

Engine flush

Firing order, cylinder layout, finding #1 cylinder

MAF or MAP sensor

Oxygen sensors, How they work, How to change, How to test

PassLock or Passkey

Thermostat issues

Transmission flush

Serpentine belt diagrams

Window issues, power window motor, replace window regulator, glass adhesive